man alpine Command

Man page for apt-get alpine Command

Man Page for alpine in Linux

Ubuntu Man Command : man alpine

Man Alpine  Command

This tutorial shows the man page for man alpine in linux.

Open terminal with 'su' access and type the command as shown below:
man alpine

Result of the Command Execution shown below:

alpine(1)                                                                                                                                                  alpine(1)

alpine an Alternatively Licensed Program for Internet News and Email

alpine [ options ] [ address , address ]

alpinef [ options ] [ address , address ]

Alpine is a screen oriented message handling tool. In its default configuration, Alpine offers an intentionally limited set of functions geared toward the
novice user, but it also has a large list of optional "power user" and personal preference features. alpinef is a variant of Alpine that uses function keys
rather than mnemonic single letter commands. Alpine's basic feature set includes:

View, Save, Export, Delete, Print, Reply and Forward messages.

Compose messages in a simple editor (Pico) with word wrap and a spelling checker. Messages may be postponed for later completion.

Full screen selection and management of message folders.

Address book to keep a list of long or frequently used addresses. Personal distribution lists may be defined. Addresses may be taken into the
address book from incoming mail without retyping them.

New mail checking and notification occurs automatically every 2.5 minutes and after certain commands, e.g. refresh screen (Ctrl L).

On line, context sensitive help screens.

Alpine supports MIME (Multipurpose Internet Mail Extensions), an Internet Standard for representing multipart and multimedia data in email. Alpine allows
you to save MIME objects to files, and in some cases, can also initiate the correct program for viewing the object. It uses the system's mailcap configura
tion file to determine what program can process a particular MIME object type. Alpine's message composer does not have integral multimedia capability, but
any type of data file including multimedia can be attached to a text message and sent using MIME's encoding rules. This allows any group of individuals
with MIME capable mail software (e.g. Alpine, PC Alpine, or many other programs) to exchange formatted documents, spread sheets, image files, etc, via Inter
net email.

Alpine uses the c client messaging API to access local and remote mail folders. This library provides a variety of low level message handling functions,
including drivers for a variety of different mail file formats, as well as routines to access remote mail and news servers, using IMAP (Internet Message
Access Protocol) and NNTP (Network News Transport Protocol). Outgoing mail is usually posted directly via SMTP (Simple Mail Transfer Protocol).

The command line options/arguments are:

address Send mail to address. This will cause Alpine to go directly into the message composer.

attach file Send mail with the listed file as an attachment.

attachlist file list
Send mail with the listed file list as an attachments.

attach_and_delete file
Send mail with the listed file as an attachment, and remove the file after the message is sent.

aux local_directory
PC Alpine only. When using a remote configuration ( p ) this tells PC Alpine the local directory to use for storing auxil
iary files, like debug files, address books, and signature files.

bail Exit if the pinerc file does not exist. This might be useful if the config file is accessed using some remote filesystem protocol. If the
remote mount is missing this will cause Alpine to quit instead of creating a new pinerc.

c context number context number is the number corresponding to the folder collection to which the f command line argument should be applied. By default
the f argument is applied to the first defined folder collection.

conf Produce a sample/fresh copy of the system wide configuration file, pine.conf, on the standard output. This is distinct from the per user
.pinerc file.

convert_sigs p pinerc
Convert signature files into literal signatures.

Copy the local address book file to a remote address book folder.

Copy the local pinerc file to a remote pinerc folder.

d debug level Output diagnostic info at debug level (0 9) to the current .pine debug[1 4] file. A value of 0 turns debugging off and suppresses the
.pine debug file.

d key[=val] Fine tuned output of diagnostic messages where "flush" causes debug file writing without buffering, "timestamp" appends each message with
a timestamp, "imap=n" where n is between 0 and 4 representing none to verbose IMAP telemetry reporting, "numfiles=n" where n is between 0
and 31 corresponding to the number of debug files to maintain, and "verbose=n" where n is between 0 and 9 indicating an inverse threshold
for message output.

f folder Open folder (in first defined folder collection, use c n to specify another collection) instead of INBOX.

F file Open named text file and view with Alpine's browser.

h Help: list valid command line options.

i Start up in the FOLDER INDEX screen.

I keystrokes Initial (comma separated list of) keystrokes which Alpine should execute on startup.

install For PC Alpine only, this option causes PC Alpine to prompt for some basic setup information, then exits.

k Use function keys for commands. This is the same as running the command alpinef.

n number Start up with current message number set to number.

o Open first folder read only.

p config file Use config file as the personal configuration file instead of the default .pinerc.

P config file Use config file as the configuration file instead of default system wide configuration file pine.conf.

pinerc file Output fresh pinerc configuration to file, preserving the settings of variables that the user has made. Use file set to `` '' to make
output go to standard out. registry cmd 20 For PC Alpine only, this option affects the values of Alpine's registry entries. Pos
sible values for cmd are set, clear, and dump. Set will always reset Alpine's registry entries according to its current settings. Clear
will clear the registry values. Clearsilent will silently clear the registry values. Dump will display the values of current registry
settings. Note that the dump command is currently disabled. Without the registry option, PC Alpine will write values into the registry
only if there currently aren't any values set.

r Use restricted/demo mode. Alpine will only send mail to itself and functions like save and export are restricted.

sort order Sort the FOLDER INDEX display in one of the following orders: arrival, date, subject, orderedsubj, thread, from, size, score, to, cc, or
reverse. Arrival order is the default. The OrderedSubj choice simulates a threaded sort. Any sort may be reversed by adding /reverse to
it. Reverse by itself is the same as arrival/reverse.

supported Some options may or may not be supported depending on how Alpine was compiled. This is a way to determine which options are supported in
the particular copy of Alpine you are using.

uninstall For PC Alpine only, this option causes PC Alpine to remove references to Alpine in Windows settings.

url url Open the given url. Cannot be used with f or F options.

v Version: Print version information.

version Version: Print version information.

x config Use configuration exceptions in config. Exceptions are used to override your default pinerc settings for a particular platform, can be a
local file or a remote folder.

z Enable ^Z and SIGTSTP so alpine may be suspended.

option=value Assign value to the config option option e.g. signature file=sig1 or feature list=signature at bottom (Note: feature list values are

There are several levels of Alpine configuration. Configuration values at a given level over ride corresponding values at lower levels. In order of
increasing precedence:

o built in defaults.
o system wide pine.conf file.
o personal .pinerc file (may be set via built in Setup/Config menu.)
o command line options.
o system wide pine.conf.fixed file.

There is one exception to the rule that configuration values are replaced by the value of the same option in a higher precedence file: the feature list vari
able has values that are additive, but can be negated by prepending "no " in front of an individual feature name. Unix Alpine also uses the following envi
ronment variables:

DISPLAY (determines if Alpine can display IMAGE attachments.)
SHELL (if not set, default is /bin/sh )
MAILCAPS (semicolon delimited list of path names to mailcap files)

/usr/spool/mail/xxxx Default folder for incoming mail.
~/mail Default directory for mail folders.
~/.addressbook Default address book file.
~/.pine debug[1 4] Diagnostic log for debugging.
~/.pinerc Personal alpine config file.
~/.newsrc News subscription/state file.
~/.mailcap Personal mail capabilities file.
~/.mime.types Personal file extension to MIME type mapping
/etc/mailcap System wide mail capabilities file.
/etc/mime.types System wide file ext. to MIME type mapping
/etc/ Local pointer to system administrator.
/etc/pine.conf System wide configuration file.
/etc/pine.conf.fixed Non overridable configuration file.
/tmp/.\usr\spool\mail\xxxx Per folder mailbox lock files.
~/.pine interrupted mail Message which was interrupted.
~/mail/postponed msgs For postponed messages.
~/mail/sent mail Outgoing message archive (FCC).
~/mail/saved messages Default destination for Saving messages.

pico(1), binmail(1), aliases(5), mailaddr(7), sendmail(8), spell(1), imapd(8)

Newsgroup: comp.mail.pine
Alpine Information Center:
Source distribution:
Alpine Technical Notes, included in the source distribution.
C Client messaging API library, included in the source distribution.

The University of Washington Alpine development team (part of the UW Office
of Computing & Communications) includes:

Project Leader: Mike Seibel
Principal authors: Mike Seibel, Steve Hubert, Jeff Franklin
C Client library & IMAPd: Mark Crispin
Documentation: Many people!
Project oversight: Terry Gray, Lori Stevens
Principal Patrons: Ron Johnson, Mike Bryant
Initial Alpine code base: Pine by the University of Washington,
Elm by Dave Taylor & USENET Community Trust
Initial Pico code base: MicroEmacs 3.6, by Dave G. Conroy
User Interface design: Inspired by UCLA's "Ben" mailer for MVS
Suggestions/fixes/ports: Folks from all over!

$Date: 2008 08 22 13:40:16 0700 (Fri, 22 Aug 2008) $

Version 2.00 alpine(1)

Related Topics

Apt Get Commands